Peterson Fluid Systems offers many accessory itesm for our popular tanks. We have several styles of heaters, mounting brackets, and dipsticks. We also offer our billet tank caps as a separate piece to use on your special fab project.
Peterson mount Brackets are machined from billet aircraft aluminum for durability. The straps are stainless steel. These mounts are used in NASCAR Winston Cup and other forms of racing.
08-0100 Mount Bracket, 6" diameter tank. Sold in pairs.
08-0102 Mount Bracket, 7” diameter tank. Sold in pairs.
08-0101 Mount Bracket, 9" diameter tank. Sold in pairs.
Peterson's lightweight sprint car tank bracket bolts directly to the front of the small block Chevy engine. This bracket is fabricated from aircraft quality aluminum and uses stainless steel straps for durability. Used by Sammy Swindell and other World of Outlaws competitors.
08-0105 Mount Bracket, 6" diameter tank, Mounts to Small Block Chevy motor.
Peterson has developed an all new tank mount for 9" round Dry Sump Oil Tanks. These mounts features the same quality of materials and construction as our proven standard tank mounts. Features a 1 1/2" mounting hole for mounting direct to roll cage tubing.
08-0106 Mount Bracket, 9" Tank for 1 1/2" tubing, sold in pairs
You asked for it and we have answered. Introducing the new dipstick for our whole line of drysump oil tanks. Features include a wide contoured handle, aluminum construction and a knurled end to help with reading oil level. Available in different lengths for our whole line of tanks.
08-1100 Dipstick 3 - 4 Gallon
08-1101 Dipstick 7" Drag tanks
08-1102 Dipstick 1.5 - 2.5 Gallon
08-1103 Dipstick 5 Gallon and DLM tanks
Pre-heating of oil in dry or wet sump systmes is important to ensure good lubrication on intitial startup. Immersion style does a great job of pre-heating your oil, however, it requires welding a bung into the tank. Wrap around styles can be glued to the outside of the tank or pan.
08-0300 300 Watt immersion style heater. 110 volt detachable cord. Come complete with both steel and aluminum 1/2" NPT bungs.
08-1300 300 Watt immersion style heater. 220 volt detachable cord. Come complete with both steel and aluminum 1/2" NPT bungs.
08-0301 300 Watt Wrap Around pad 2" x 15". 110 Volt with detachable cord. Use hi-temp RTV to glue to tank or pan.
08-0302 400 Watt Wrap Around pad 4" x 10". 110 Volt with detachable cord. Use hi-temp RTV to glue to tank or pan.
08-0310 Replacement cord for 08-0300
08-0311 Replacement cord for 08-0301 & 08-0302
08-1310 Replacement cord for 08-0310
08-0501 Fitting - 10 AN Nose x -12 AN Port
08-0502 Fitting - 12 AN Nose x -12 AN Port
08-0503 Fitting - 16 AN Nose x -12 AN Port
08-0504 Plug -6 AN Port Plug (Tank Drain)
08-0505 Plug -12 AN Port Plug (Tank Drain)
08-0506 O-ring kit. -12 AN O-rings, 5 per pack
Peterson has several versions of caps and bungs available. They work great for custom projects and we can do custom logos on them for a small setup fee.
08-0601 Oil tank cap assembly, including filler neck
08-0602 Oil tank replacement cap only
08-0603 Aluminum filler neck only
08-0611 Billet Cap and Bung Assembly, 1 7/16" Diameter
08-0612 Billet Cap only, 1 7/16" Diameter
08-0613 Billet Bung only, 1 7/16" Diameter
08-0614 O-ring only, 1 7/16" Diameter
08-0621 Billet Cap and Bung Assembly, 3 1/8" Diameter
08-0622 Billet Cap only, 3 1/8" Diameter
08-0623 Billet Bung only, 3 1/8" Diameter
08-0624 O-ring only, 3 1/8" Diameter