Tech Library

Pump Diagrams

Pump Exploded View

PDF Plumbing Diagrams for Peterson Pumps


Tech Tips

Pumps
- Gerotor Advantages
- Pump Cavitation-What causes it?
- Can I run a Wet Sump engine and create vacuum in the crankcase?
- Wet sump or dry sump?
- How do I choose the right sized pump for my application? 3, 4, or 5 stages?
- What is the torque specification on the draw rods?
- Can I cap off an unused stage or tie two stages together?
- Can I use a check valve in the oil feed line to keep oil from running back to the engine when not in use?

- Can I just weld a fitting to the side of the pan or use the drain plug for a feed?

Drives
- Oil Pump Drive Speeds
- HTD vs. Gilmer
- How tight does the belt need to be?

Filters
- Micron Filter Sizes

Oil Tanks
- How full to fill them
- Custom tank orders
- Breather Cans

Plumbing
- AN Thread Sizes

 

Home | Dealers | Tech | Contact | About Us | Site Map
Pumps | Drives | Tanks | Filters | Engine | Fittings

Copyright Peterson Fluid Systems Inc.
Pumps Drives Tanks Filters Engine Fittings